China K Series Shaft Output Foot Mounted Gearbox Gear Reduction with AC Motors with Good quality

Merchandise Description

Helical Bevel Gear Motor (K Type) 

Enter Configurations

Motor mounted  
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Input (Ad link)

Output Configurations

Sound output shaft

 

Reliable output shaft with flange

Hollow output shaft

 

Hollow output shaft with flange

Variants of the Helical Bevel Gear Device Sequence K / KF / KA / KAF

Foot- or flange-mounted

B5 or B14 flange-mounted

Reliable shaft or hollow shaft

 

Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

 

K Sequence Helical Gearbox Motor Reductor,Flange Mounted KF Series Helical Bevel Pace Reducer With Solid Output Shaft

With their large efficiency in each directions of rotation and at any input pace, these proper-angle gear models are really energy-efficient. Their substantial-stamina gearing is put on-cost-free and lasts a equipment unit’s life span.

Specification

Design

Shaft Dia.

mm

Horizontal Center Height mm

External Flange Dia.

 mm

Energy
(kw)

Ratio

(i)

Nominal Torque

(Nm)

Strong Shaft

Hollow Shaft

K/KF/KA/KAF37

ф25

ф30

one hundred

160

.12-2.2

8-102

180

K/KF/KA/KAF47

ф30

ф35

112

200

.18-four

8-126

380

K/KF/KA/KAF57

ф35

ф40

132

250

.twenty five-5.five

8-143

580

K/KF/KA/KAF67

ф40

ф40

one hundred forty

250

.37-7.five

8-143

680

K/KF/KA/KAF77

ф50

ф50

180

300

.75-eleven

8-a hundred seventy five

1300

K/KF/KA/KAF87

ф60

ф60

212

350

one.5-18.five

eight-197

2500

K/KF/KA/KAF97

ф70

ф70

265

450

2.2-30

eight-197

3900

K/KF/KA/KAF107

ф90

ф90

315

450

four-45

eight-197

6800

K/KF/KA/KAF127

ф110

ф100

375

550

7.5-90

eight-197

11200

K/KF/KA/KAF157

ф120

ф120

450

660

eleven-a hundred and ten

eight-198

11700

K/KF/KA/KAF167

ф160

ф135

500

15-one hundred sixty

eight-186

32000

K/KF/KA/KAF187

ф190

ф155

600

eighteen.5-two hundred

eight-186

50000

Firm Profile
Packing
Scenarioes

FAQ
Q1: I want to get your merchandise, how can I pay?
A: You can pay out via T/T(thirty%+70%), L/C ,D/P and many others. 

Q2: How can you ensure the quality?
A: 1 year’s guarantee from B/L date. If you meet up with with quality issue, please send out us pictures or online video to check, we assure to send spare areas or new products to exchange. Our ensure not consist of inappropriate procedure or mistaken specification assortment. 

Q3: How we select models and technical specs?
A: You can e-mail us the sequence code (for example: RC collection helical gearbox) as well as need information, this kind of as motor power,output velocity or ratio, service element or your software…as significantly info as possible. If you can source some photos or drawings,it is good. 

This fall: If we do not discover what we want on your site, what should we do?
A: We supply 3 possibilities:
1, You can electronic mail us the photographs, drawings or descriptions details. We will attempt to style your goods on the foundation of our
standard versions.
2, Our R&D section is professional for OEM/ODM items by drawing/samples, you can send out us samples, we do customized design for your bulk getting.
3, We can build new products if they have very good industry. We have currently developed many items for special using effective, such as unique gearbox for agitator, cement conveyor, footwear machines and so on. 

Q5: Can we purchase 1 laptop of every merchandise for quality screening?
A: Yes, we are glad to acknowledge demo buy for high quality testing.

Q6: How about your solution shipping time?
A: Typically for 20’container, it takes twenty five-thirty workdays for RV collection worm gearbox, 35-forty workdays for helical gearmotors.

US $60-400
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Foot/Flange Mounted
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:

###

Input Configurations
Motor mounted  
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Input (AD connection)
Output Configurations
Solid output shaft
 
Solid output shaft with flange
Hollow output shaft
 
Hollow output shaft with flange
Variants of the Helical Bevel Gear Unit Series K / KF / KA / KAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
 
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm
 

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
K/KF/KA/KAF37
ф25
ф30
100
160
0.12-2.2
8-102
180
K/KF/KA/KAF47
ф30
ф35
112
200
0.18-4
8-126
380
K/KF/KA/KAF57
ф35
ф40
132
250
0.25-5.5
8-143
580
K/KF/KA/KAF67
ф40
ф40
140
250
0.37-7.5
8-143
680
K/KF/KA/KAF77
ф50
ф50
180
300
0.75-11
8-175
1300
K/KF/KA/KAF87
ф60
ф60
212
350
1.5-18.5
8-197
2500
K/KF/KA/KAF97
ф70
ф70
265
450
2.2-30
8-197
3900
K/KF/KA/KAF107
ф90
ф90
315
450
4-45
8-197
6800
K/KF/KA/KAF127
ф110
ф100
375
550
7.5-90
8-197
11200
K/KF/KA/KAF157
ф120
ф120
450
660
11-110
8-198
11700
K/KF/KA/KAF167
ф160
ф135
500
15-160
8-186
32000
K/KF/KA/KAF187
ф190
ф155
600
18.5-200
8-186
50000
US $60-400
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Foot/Flange Mounted
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:

###

Input Configurations
Motor mounted  
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Input (AD connection)
Output Configurations
Solid output shaft
 
Solid output shaft with flange
Hollow output shaft
 
Hollow output shaft with flange
Variants of the Helical Bevel Gear Unit Series K / KF / KA / KAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
 
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm
 

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
K/KF/KA/KAF37
ф25
ф30
100
160
0.12-2.2
8-102
180
K/KF/KA/KAF47
ф30
ф35
112
200
0.18-4
8-126
380
K/KF/KA/KAF57
ф35
ф40
132
250
0.25-5.5
8-143
580
K/KF/KA/KAF67
ф40
ф40
140
250
0.37-7.5
8-143
680
K/KF/KA/KAF77
ф50
ф50
180
300
0.75-11
8-175
1300
K/KF/KA/KAF87
ф60
ф60
212
350
1.5-18.5
8-197
2500
K/KF/KA/KAF97
ф70
ф70
265
450
2.2-30
8-197
3900
K/KF/KA/KAF107
ф90
ф90
315
450
4-45
8-197
6800
K/KF/KA/KAF127
ф110
ф100
375
550
7.5-90
8-197
11200
K/KF/KA/KAF157
ф120
ф120
450
660
11-110
8-198
11700
K/KF/KA/KAF167
ф160
ф135
500
15-160
8-186
32000
K/KF/KA/KAF187
ф190
ф155
600
18.5-200
8-186
50000

Hypoid Bevel Vs Straight Spiral Bevel – What’s the Difference?

Spiral gears come in many different varieties, but there is a fundamental difference between a Hypoid bevel gear and a Straight spiral bevel. This article will describe the differences between the two types of gears and discuss their use. Whether the gears are used in industrial applications or at home, it is vital to understand what each type does and why it is important. Ultimately, your final product will depend on these differences.
Gear

Hypoid bevel gears

In automotive use, hypoid bevel gears are used in the differential, which allows the wheels to rotate at different speeds while maintaining the vehicle’s handling. This gearbox assembly consists of a ring gear and pinion mounted on a carrier with other bevel gears. These gears are also widely used in heavy equipment, auxiliary units, and the aviation industry. Listed below are some common applications of hypoid bevel gears.
For automotive applications, hypoid gears are commonly used in rear axles, especially on large trucks. Their distinctive shape allows the driveshaft to be located deeper in the vehicle, thus lowering the center of gravity and minimizing interior disruption. This design makes the hypoid gearset one of the most efficient types of gearboxes on the market. In addition to their superior efficiency, hypoid gears are very easy to maintain, as their mesh is based on sliding action.
The face-hobbed hypoid gears have a characteristic epicycloidal lead curve along their lengthwise axis. The most common grinding method for hypoid gears is the Semi-Completing process, which uses a cup-shaped grinding wheel to replace the lead curve with a circular arc. However, this method has a significant drawback – it produces non-uniform stock removal. Furthermore, the grinding wheel cannot finish all the surface of the tooth.
The advantages of a hypoid gear over a spiral bevel gear include a higher contact ratio and a higher transmission torque. These gears are primarily used in automobile drive systems, where the ratio of a single pair of hypoid gears is the highest. The hypoid gear can be heat-treated to increase durability and reduce friction, making it an ideal choice for applications where speed and efficiency are critical.
The same technique used in spiral bevel gears can also be used for hypoid bevel gears. This machining technique involves two-cut roughing followed by one-cut finishing. The pitch diameter of hypoid gears is up to 2500 mm. It is possible to combine the roughing and finishing operations using the same cutter, but the two-cut machining process is recommended for hypoid gears.
The advantages of hypoid gearing over spiral bevel gears are primarily based on precision. Using a hypoid gear with only three arc minutes of backlash is more efficient than a spiral bevel gear that requires six arc minutes of backlash. This makes hypoid gears a more viable choice in the motion control market. However, some people may argue that hypoid gears are not practical for automobile assemblies.
Hypoid gears have a unique shape – a cone that has teeth that are not parallel. Their pitch surface consists of two surfaces – a conical surface and a line-contacting surface of revolution. An inscribed cone is a common substitute for the line-contact surface of hypoid bevel gears, and it features point-contacts instead of lines. Developed in the early 1920s, hypoid bevel gears are still used in heavy truck drive trains. As they grow in popularity, they are also seeing increasing use in the industrial power transmission and motion control industries.
Gear

Straight spiral bevel gears

There are many differences between spiral bevel gears and the traditional, non-spiral types. Spiral bevel gears are always crowned and never conjugated, which limits the distribution of contact stress. The helical shape of the bevel gear is also a factor of design, as is its length. The helical shape has a large number of advantages, however. Listed below are a few of them.
Spiral bevel gears are generally available in pitches ranging from 1.5 to 2500 mm. They are highly efficient and are also available in a wide range of tooth and module combinations. Spiral bevel gears are extremely accurate and durable, and have low helix angles. These properties make them excellent for precision applications. However, some gears are not suitable for all applications. Therefore, you should consider the type of bevel gear you need before purchasing.
Compared to helical gears, straight bevel gears are easier to manufacture. The earliest method used to manufacture these gears was the use of a planer with an indexing head. However, with the development of modern manufacturing processes such as the Revacycle and Coniflex systems, manufacturers have been able to produce these gears more efficiently. Some of these gears are used in windup alarm clocks, washing machines, and screwdrivers. However, they are particularly noisy and are not suitable for automobile use.
A straight bevel gear is the most common type of bevel gear, while a spiral bevel gear has concave teeth. This curved design produces a greater amount of torque and axial thrust than a straight bevel gear. Straight teeth can increase the risk of breaking and overheating equipment and are more prone to breakage. Spiral bevel gears are also more durable and last longer than helical gears.
Spiral and hypoid bevel gears are used for applications with high peripheral speeds and require very low friction. They are recommended for applications where noise levels are essential. Hypoid gears are suitable for applications where they can transmit high torque, although the helical-spiral design is less effective for braking. For this reason, spiral bevel gears and hypoids are generally more expensive. If you are planning to buy a new gear, it is important to know which one will be suitable for the application.
Spiral bevel gears are more expensive than standard bevel gears, and their design is more complex than that of the spiral bevel gear. However, they have the advantage of being simpler to manufacture and are less likely to produce excessive noise and vibration. They also have less teeth to grind, which means that they are not as noisy as the spiral bevel gears. The main benefit of this design is their simplicity, as they can be produced in pairs, which saves money and time.
In most applications, spiral bevel gears have advantages over their straight counterparts. They provide more evenly distributed tooth loads and carry more load without surface fatigue. The spiral angle of the teeth also affects thrust loading. It is possible to make a straight spiral bevel gear with two helical axes, but the difference is the amount of thrust that is applied to each individual tooth. In addition to being stronger, the spiral angle provides the same efficiency as the straight spiral gear.
Gear

Hypoid gears

The primary application of hypoid gearboxes is in the automotive industry. They are typically found on the rear axles of passenger cars. The name is derived from the left-hand spiral angle of the pinion and the right-hand spiral angle of the crown. Hypoid gears also benefit from an offset center of gravity, which reduces the interior space of cars. Hypoid gears are also used in heavy trucks and buses, where they can improve fuel efficiency.
The hypoid and spiral bevel gears can be produced by face-hobbing, a process that produces highly accurate and smooth-surfaced parts. This process enables precise flank surfaces and pre-designed ease-off topographies. These processes also enhance the mechanical resistance of the gears by 15 to 20%. Additionally, they can reduce noise and improve mechanical efficiency. In commercial applications, hypoid gears are ideal for ensuring quiet operation.
Conjugated design enables the production of hypoid gearsets with length or profile crowning. Its characteristic makes the gearset insensitive to inaccuracies in the gear housing and load deflections. In addition, crowning allows the manufacturer to adjust the operating displacements to achieve the desired results. These advantages make hypoid gear sets a desirable option for many industries. So, what are the advantages of hypoid gears in spiral gears?
The design of a hypoid gear is similar to that of a conventional bevel gear. Its pitch surfaces are hyperbolic, rather than conical, and the teeth are helical. This configuration also allows the pinion to be larger than an equivalent bevel pinion. The overall design of the hypoid gear allows for large diameter shafts and a large pinion. It can be considered a cross between a bevel gear and a worm drive.
In passenger vehicles, hypoid gears are almost universal. Their smoother operation, increased pinion strength, and reduced weight make them a desirable choice for many vehicle applications. And, a lower vehicle body also lowers the vehicle’s body. These advantages made all major car manufacturers convert to hypoid drive axles. It is worth noting that they are less efficient than their bevel gear counterparts.
The most basic design characteristic of a hypoid gear is that it carries out line contact in the entire area of engagement. In other words, if a pinion and a ring gear rotate with an angular increment, line contact is maintained throughout their entire engagement area. The resulting transmission ratio is equal to the angular increments of the pinion and ring gear. Therefore, hypoid gears are also known as helical gears.

China K Series Shaft Output Foot Mounted Gearbox Gear Reduction with AC Motors     with Good qualityChina K Series Shaft Output Foot Mounted Gearbox Gear Reduction with AC Motors     with Good quality
editor by czh 2023-01-29

gear drive

As one of leading gear drive manufacturers, suppliers and exporters of mechanical products, We offer gear drive and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of gear drive

Recent Posts